1. The maximum rotation speed of the spindle bearing of the high-speed stranding machine is 3000rpm.
2. Automatic tension controller: During stranding, the tension of the take-up needs to be continuously increased when the take-up is from the bottom of the reel to the full reel. This function can automatically track and adjust the take-up tension; so that the entire take-up tension is balanced and the same, and at the same time The device can also adjust the tension without shutting down.
3. The main engine is lubricated by oil and cooled by natural circulation, which can reasonably and effectively increase the service life of the main shaft bearing.
The wire-passing system adopts a new structure, and the wire can be directly routed from the main shaft bearing guide wheel to the bow belt, which prevents scratches and jumps caused by the failure of the corner guide wheel on the aluminum plate.
4. The machine is equipped with 3 pressing devices to ensure the roundness of the conductor after stranding and reduce the loss of plastic materials.
5. The entire equipment is driven by synchronous belts, and there is no lubrication point inside the machine to keep the inside of the machine clean, without oil stains in the stranding, and meet the conductor stranding of various wire types with high surface layer cleanliness requirements.
6. To adjust the twisting distance, only one take-up wheel needs to be replaced, and to adjust the twisting direction, it is only necessary to toggle the reversing lever, and the operation is simple, thereby reducing the operator's error rate and work intensity. The bearings of the whole equipment are made of big Japanese brands, and the bow belts are made of new materials, with good softness, preventing stock jumping caused by shaking during high-speed rotation. The frequency converter, PLC, magnetic powder clutch, electromagnetic brake, hydraulic jack, etc. are all selected from abroad Import big brands to reduce the failure rate and maintenance costs.
