1. The server is lubricated by lubricating oil, of course, the circulation system is cooled, and the service life of the machine tool spindle is reasonably increased. The crimping system software uses a new structure, the power line is immediately crimped from the machine tool spindle guide wheel to the bow carry, reducing the problem of scratching and jumping due to the corner of the corner guide wheel on the aluminum plate.
2. The entire equipment is driven by a synchronous belt, the body has no lubrication point, the body is kept clean, the stranded wire is free of oil stains, and the multi-stranded stranded wire of various types of wires with high surface cleanliness requirements is incorporated.
3. To adjust the twisting distance, only one take-up wheel needs to be replaced, and to adjust the twisting direction, it is only necessary to rotate the commutation rod, which is simple and practical, thus reducing the error rate and work intensity of the workers. The rolling bearings of the entire equipment are made of big Japanese brands, and the bow belts are made of new environmentally friendly materials, which are soft and can prevent stock jumping due to jitter during high-speed rotation. Frequency conversion governor, PLC, synchronous motor, electromagnetic brake, jack, etc. Use imported big brands to reduce equipment failure rate and maintenance costs.
4. The spindle speed ratio of the machine tool is 3,000 rpm.
5. Fully automatic tension sensor: When twisting the wire, when the coiled wire is connected from the bottom of the pot to the full coil, the supporting force of the coiled wire needs to be continuously expanded. The supporting force of the coiled wire can be automatically tracked and adjusted; the supporting force of the whole coiled wire is balanced and consistent, At the same time, the machine can adjust the support force without stopping.
6. The machine contains 3 pressing devices to ensure the glossiness of the stranded wires and reduce the loss of insulating layer materials.
