What Is The Structure Of The Tube Stranding Machine?

The pipe stranding machine includes a frame, a steel sleeve, a piston, a top, a 1-axis, a 2-axis, a cover plate, a butterfly spring, a gas pipe connector and an intake manifold. on the second axis. The butterfly spring is pressed against the steel cover by a cover fixedly attached to the bottom of the steel cover. The mechanism connector is arranged on one side of the steel cover and is connected with the sealed cavity. The air intake pipe is connected with the air pipe connector. The upper part of the piston is provided with a buckle, the first shaft is arranged in the buckle watch and connected to the piston to rotate, and the upper end is fixed on the top of the first shaft. Among them, the outer end face of the butterfly spring is pressed into the cover, and the cover is fixed on the end face of the steel sleeve, so the butterfly spring has a certain shape variable in the initial state, which provides the axial force of the top tightening wire plate. If the wire plate is tightened, the butterfly spring is Type variable and therefore elastic, as long as the inside of the sealed cavity is not ventilated, the end does not shrink and the wire plate always remains the same.