The pipe stranding machine can better exert its application effect in the application link. When the product is applied, the lubrication condition of the rotating part of the equipment should be checked to ensure that it can play a better role in the application link and has a good performance in the application link. reliability. The balance of the product should be considered during operation.
After all parts of the equipment are properly inspected, personnel should leave to protect and avoid accidents. Therefore, in the running link, its speed is very low and there will be no noise. If there is an abnormality in the operation link, it can be stopped in time. Operators should not wear gloves when operating in the production process to avoid some accidents.
During the service life of the pipe stranding machine, labor protection articles should be worn, production tools should be prepared, and materials should be received in accordance with production tasks and process regulations to ensure that the received materials are qualified. At the same time, equipment and equipment should be checked before application. Under rotating conditions, lubricating oil should be added to different parts of each rotating gear. In order to better ensure its lubricating effect, at the same time, press the excitation switch to idling before working, and confirm the direction of the ketone body according to the process.
It can be used normally in the operation of the equipment and installed according to the process requirements. Well, the pitch wheel was selected, and the split film was installed in the grinding frame. The second is to open the protective cover, pull open the spring pins on the side, and take out the wires from the basket respectively. And there is a brake pin on one side of the bracket, so in the application process, adjust the tension of the full wire reel according to the wire diameter.
