1. When the starting point of the twisted wire is correct, then the twisted wire can be started, and the set width can be tested by stopping at both ends.
2. Calibrating the width of the skeleton and the starting point is the first priority, and it is also the most important.
3. The size of the wire diameter indicated by the stranded wire is the actual wire diameter, so it is necessary to add the thickness of the enameled coating when setting the wire diameter to be correct.
4. When using aluminum wire, you must pay attention to it. The tension should be adjusted to be much smaller than that of copper wire of the same thickness, so as to avoid the wire diameter being thinned and the outer insulating paint bursting, so it will affect the quality of the product.
5. The speed of the line is not suitable for too fast (overspeed), but we must pay attention to whether the medium and low speed torque is sufficient.
6. The distance between the cable outlet and the skeleton should not be too far, it will affect the accuracy of the cable coupling.
